System > Settings > System
Video Output:
>Resolution - 1920x1080p Full HD
>Refresh Rate - 60 Hz or the maximum your TV can handle
> Video Calibration
This screen allows you to calibrate the User Interface by adjusting the overscan. Use this tool if the image being displayed is too large or small for your display. It offers the ability to adjust
-The overscan of the video - How close to the edges of the screen that the image is displayed. On the 1st screen notice the blue bars in the top left hand corner. Simply use your remotes directional buttons until the blue bars just disappear off your TV screen.
Once set simply press the select (middle) button on the remote, which will take you to the 2nd calibration screen and do the same to make the blue bars just disappear off the bottom right of your TV screen.
The 3rd screen sets the position where subtitles will be displayed. You want to keep the blue bar low and central on the screen.
The 4th and final screen adjusts pixel ratio and allows you calibrate the aspect ratio at which videos are played back. Using the directional buttons, adjust the blue rectangle until it is a perfectly square.
No comments:
Post a Comment